Restoration Blog: 1966 Lotus Elan 26R, Update 5

April 13, 2012 2:37 PM

The engine is almost in place! Jay and Jim Hall walk you through all the new parts that have been fabricated using the 3D printer, including suspension bits and various brackets. There's also a new alternator, and a few new projects underway.

Additional Content

Restoration Blog: 1966 Lotus Elan 26R, Update 8
Restoration Blog: 1966 Lotus Elan 26R, Update 8

This week, Jim and Jay are making headers and prototypes for the hood and other... View »

Restoration Blog: 1966 Lotus Elan 26R, Update 11
Restoration Blog: 1966 Lotus Elan 26R, Update 11

The body's in the spray booth waiting for paint; the tires are on, and the... View »

Restoration Blog: 1966 Lotus Elan 26R, Update 10
Restoration Blog: 1966 Lotus Elan 26R, Update 10

Jay and Professor Jim Hall are closing in on the finish line. A little paint... View »

Restoration Blog: 1966 Lotus Elan 26R, Update 6
Restoration Blog: 1966 Lotus Elan 26R, Update 6

In this latest installment of what's become known as Mr. Hall's Opus, Jim and Jay... View »

Restoration Blog: 1966 Lotus Elan 26R, Update 4
Restoration Blog: 1966 Lotus Elan 26R, Update 4

You wanted to know what was happening, so Jay and Jim are here with an... View »

Restoration Blog: 1966 Lotus Elan, Update 2
Restoration Blog: 1966 Lotus Elan, Update 2

Join Jay and Lotus man Jim for a look at the reinforced chassis, a brand-new... View »